Roland System 100m

Hello

The switch in the M121 can be rewired to
switch the filter from the M121 HP Mod and back
to original wiring, it is 2Pole 3Way so this
is possible.
Bandpass on the M121 is more tricky . . .

Separate outs on VCO is easy, but you will need
some panel sockets spare.
Also it is quite easy to add a sine wave
shaper onto the VCO

There is a M110 sync in mod also, in the photo's
section.


-ryk


--- In RolandSystem100m@yahoogroups.com, "peterdwendt"
<peterwendt@...> wrote:
>
> Hello,
> 
> I just joined the forum, and immediately found the 121 HP VCF mod. 
Nice.
> 
> There are two mods I would really like for my 100m:
> 
> 1) switchable modes for the filters (not just LP or HP).  Someone on
> Matrixsynth mentioned that this was possible, in reply to the posting
> about the SEM-filter-in-121-box mod.
> 
> 2) simultaneous waveform outputs on the 112 VCOs.  Having only one
> waveform at a time per VCO is annoying.
> 
> Has anyone done these mods?
> 
> Thanks,
> 
> Peter
>