I've been reading the old Serge user manual, and in it, it shows two
programmers being hooked up as an 8 stage sequencer. As standard, the
programmers will NOT work this way, as the last fired stage in each
programmer remains active. On the drawing, one of the PULSE outputs has a
hex drawn around it. My conclusion is there must be a switch fitted to allow
the cascading of programmers by joining their "C" busses together (and
possibly feeding the outputs of one set of buffers into the inputs of the
next). I have never seen a photo of a programmer actually fitted with this
switch though. Has any one else come across this? Cna they confirm I'm
jumping to the correct conclusion?
Cheers,
Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
programmers being hooked up as an 8 stage sequencer. As standard, the
programmers will NOT work this way, as the last fired stage in each
programmer remains active. On the drawing, one of the PULSE outputs has a
hex drawn around it. My conclusion is there must be a switch fitted to allow
the cascading of programmers by joining their "C" busses together (and
possibly feeding the outputs of one set of buffers into the inputs of the
next). I have never seen a photo of a programmer actually fitted with this
switch though. Has any one else come across this? Cna they confirm I'm
jumping to the correct conclusion?
Cheers,
Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>