> you are correct. sorry, i forgot to mention the sequential switch inHmmm. Interesting. There's no sequential switch shown in the setup
> that same panel. you basically put both of the programmer final
> outputs or mix outputs to the switch inputs and used the last step
> pulse out of each programmer to cycle between each of them or you
> use the pulse sequencer individual pulse outputs to cycle the switch.
in the user manual, but it's a possibility. I'd guessed that Serge
might have hard-wired a few Peak and Trough cards to get the highest
output of two programmers and added a switch to join the reset buses,
but using a Triple Bidirectional Router would be a neater solution.
Anyone know if that's the way he did it?
Thanks
SPR
_______________________________________________________________________
Freeserve AnyTime, only £13.99 per month with one month's FREE trial!
For more information visit http://www.freeserve.com/time/ or call free on 0800 970 8890