Well, that's just it.... I'd gladly diddle a trimpot but there are a few
here... I don't want to screw up my volt/octave tracking or anything
related....
What I thought was odd is, the 3 oscillators in question sound about the
same.... so they all must be trimmed a little off ... which is why I wondered
about a power supply (voltage) problem. It does measure a solid 12V.
So I gather that I'm the only one that hears tiny fuzzies in the oscillator
sinewaves? If so, that's great... it renews my faith in Serge.
Thanks for the help
John P.
darreljohansen wrote:
here... I don't want to screw up my volt/octave tracking or anything
related....
What I thought was odd is, the 3 oscillators in question sound about the
same.... so they all must be trimmed a little off ... which is why I wondered
about a power supply (voltage) problem. It does measure a solid 12V.
So I gather that I'm the only one that hears tiny fuzzies in the oscillator
sinewaves? If so, that's great... it renews my faith in Serge.
Thanks for the help
John P.
darreljohansen wrote:
> --- In SergeModular@y..., John Papiewski <johnp299792@a...> wrote:
>
> > I am disappointed at the lack of response to my sine wave question.
> >
> > JP
>
> John,
>
> If I remember correctly, there is a trim pot for smoothing out the
> sine wave on the NTO/PCO. Now, which one is another story...
>
> Darrel
>
>
> To unsubscribe from this group, send an email to:
> SergeModular-unsubscribe@yahoogroups.com
>
> Keep on Patchin'!
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/