Hello again,
For all of the advice received in response to my prior posting, I am
most grateful.
From these replies, I have tentatively decided upon the following
arrangement:
Wilson Analog Dealy (WAD)
Frequency Shifter (FRS)
Dual Transient Generator (DTG)
- with 'Signal In' mod.
Resonant Equalizer (EQ)
Wave Multipliers (VCM)
Dual Channel Stereo Mixer (DCSM)
Active Processor (ACPR)
Adapters (ADP)
I had initially hoped to include the Dual Universal Slope Generator
(DSG) in lieu of the DTG, but the FRS is a three space module instead
of two (as I had initially thought it to be). The only option here
would be to see if the ADP could be squeaked into the 'blank' panel
space on the FRS - not likely however.
Once more, my primary intent here is to create a panel for processing
external audio.
I welcome any final opinions regrding this configuration.
Best wishes -
Trevor
For all of the advice received in response to my prior posting, I am
most grateful.
From these replies, I have tentatively decided upon the following
arrangement:
Wilson Analog Dealy (WAD)
Frequency Shifter (FRS)
Dual Transient Generator (DTG)
- with 'Signal In' mod.
Resonant Equalizer (EQ)
Wave Multipliers (VCM)
Dual Channel Stereo Mixer (DCSM)
Active Processor (ACPR)
Adapters (ADP)
I had initially hoped to include the Dual Universal Slope Generator
(DSG) in lieu of the DTG, but the FRS is a three space module instead
of two (as I had initially thought it to be). The only option here
would be to see if the ADP could be squeaked into the 'blank' panel
space on the FRS - not likely however.
Once more, my primary intent here is to create a panel for processing
external audio.
I welcome any final opinions regrding this configuration.
Best wishes -
Trevor