SergeModular

You can't use the outputs sequencially because they
run in tandem and you can't loop... if i'm reading you
right on this.Sure, you can make the first row output
to "A" and the second row to "B" and so forth just as
it's indicated on the face plate, but they won't go in
sequencial order.... it's all together. I've harped on
Rex for years about the "lock step" nature of the TKB
but i'm barking up the wrong tree. What i wanted was
for each row to be able to accept it's own clock. Yes,
I'd have to give up the vertical running but so what?
wouldn't it be a hoot to have each row of the TKB able
to be driven by it's own clock?...with all the random
and reverse and reset functions intact?? Beam me up!!!
Kind regards
john duval

> > 3. What are the differences between a Sequencer
> and a Sequencer
> > Programmer? (Other than obvious) Can I use the 4
> outputs (A, B, C, D) of
> > the 4-stage Sequencer Programmer sequentially? I
> mean: stages 1-4 output
> > from A, then 5-8 from B, 9-12 from C, 13-16 from D
> and then loop the
> > sequence? If this is the case, is there any need
> for an extra Sequencer
> > (8x2) as suggested by Rex in the preconfigured
> Sequencer panel? I
> > suppose you can clock them at different rates, but
> are two 4-stage
> > sequencers better than one with 8 stages?
>
> >

__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
http://hotjobs.sweepstakes.yahoo.com/careermakeover