From: "James R. Coplin" <moog@...>
circuit - using a 220 ohm resistor would be better than a piece of wire. It
will give the internal circuitry some protection, and being 100 times
smaller than the original resistor, will act like a "piece of wire" for all
other intents and purposes.
Ken
_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>This isn't an approved mod or anything and I don't know what problems it mayThoughts from someone who does electronics, but hasn't looked at the sync
>cause. I have *NOT* run it past Rex. I *AM NOT* an electrical engineer or
>anything so you have been warned.
>
>But, if you hate the soft sync on the osc. as much as I do, here is a
>potential remedy. If you remove the 22k resistor on the sync input and just
>strap the connection with a wire, you will get hard sync behavior from the
>osc. I have done this to my osc and I am happy with it but...
circuit - using a 220 ohm resistor would be better than a piece of wire. It
will give the internal circuitry some protection, and being 100 times
smaller than the original resistor, will act like a "piece of wire" for all
other intents and purposes.
Ken
_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>