At 7:39 PM -0700 5/3/05, Blake Wilson wrote:
a few folks have asked about this, so i though i'd briefly
clarify:
as you know, these modules have pcb mounted power supply jacks,
which a power cable plugs into on the board, and then the other end
plugs into whatever power supply distribution system you have. on the
pcb end, the power cable is *standard* on all modules. on the distro
end, they are 3 pin custom molex connectors (i.e. blacet style; the
blacet module's cable is not modified) which plug into my custom
molex-based distro system. to use these modules, you can simply buy a
new cable with standard plugs on both ends or wire them however you
wish.
so, nothing was done to the module or the pcb itself...just the
cable.
ps: these work great with Serge!
thanks,
blake
(note again: the non-Serge modules, below, are customized for banana jacks and have non-standard power supply plugs, i.e. they will not plug into your Doepfer or Blacet system in the condition you receive them in. Unless you buy a module with the Blacet power supply and custom power distribution system shown here, you will need to conform the power cable to your particular distribution system, which is not difficult at all if you know what you are doing, like I did when I converted them.)
Doepfer A-177 ($75 new): $50
Doepfer A-199 Spring Reverb ($129 new): $89
Analogue Systems RS-60 VC ADSR ($165 new): $110
Analogue Systems RS-30 Freq to Voltage/Env. Follower ($135 new): $89
Anlogue Systems RS-220 X-Y Controller Joystick ($229 new): $150
Blacet EG-1 (assembled from kit; kit is $135): $100Blacet 500mA power supply and custom distro system $45 (includes FracRac)--blake wilsonmbw@...motto:Our life is shaped by our mind; we become what we think. Suffering follows an evil thought as the wheels of a cart follow the oxen that draws it. Our life is shaped by our mind; we become what we think. Joy follows a pure thought like a shadow that never leaves.
- The Buddha