SergeModular

riluttante wrote:

>
> ---
>
> >The Blue Voice has two cable braids running to the power supplies
> (I'm >guessing this is
> >simply because it needs more power than the other panels?), the CV2
> and Soup >Kitchen
> >each have one cable braid. The TKB has two braids, only one of which
> has a >connector that
> >fits the power supply board. What's the other cable for?
>


>
> That plugs into a quantizer if you ever get one.
>

>
>
> >Rex suggested that I get something a little more powerful than only a
> PS4 to >power this
> >power-hungry panel configuration, so I ended up getting a PS4 plus a
> PS2 as a >backup.
> >When I connect all four panels to the PS4 distribution board
> sometimes both l>ights on the
> >distro board come on, and sometimes only one of them (and the lights
> on the >panels
> >themselves don't light up). So that would mean the PS4 can't handle
> the four >panels by
> >itself?
>

>
> I don't know, I would doubt that that's the problem. sounds like there
> might be a bad connection?
>

>
> >Most of the voltages on the Serge are positive only, right? So all
> the voltages >from the
> >Random Source and DTG are all in the positive domain? And only the
> black >outputs on the
> >DSG and the Quadrature Osc go into negative too?
>
> Yes. Black = bipolar or AC, blue = DC. Note: DC inputs can accept
> negative voltages.
>
> >The boxes all have two holes on each side covered by little black
> plastic caps. If >one were
> >to rack mount the boxes, is this where the rack ears would be
> attached? >(They're "low
> >profile" boxes, BTW)
>
> dunno?
>
> Thanks for any info!
>
> Thomas
>
>

m/n/m/l
surreal electronic music, sound, noise
http://www.mnmlnoise.com