--- In SergeModular@yahoogroups.com, "riluttante" <riluttante@...>
wrote:
other panels?), the CV2 and Soup Kitchen each have one cable braid.
The TKB has two braids, only one of which has a connector that fits
the power supply board. What's the other cable for?
On voice panels, Rex often isolates the supply line to the VCOs.
The second TKB braid is intended to route the A through D outputs
directly to a Quantizer (TKB) on another panel. The CV1 includes
this module and typically would have a plug that mates with yours.
purchase advice tells you a lot - but you might consider using the
PS2 to power the Voice panel for the time being.
domain? And only the black outputs on the DSG and the Quadrature Osc
go into negative too?
On the Serge, black jacks are bipolar while blue are DC-coupled. I
believe you can use a processor to offset the positive bias. Due to
bipolar attenuators on most VC inputs this is rarely necessary.
rack ears would be attached? (They're "low profile" boxes, BTW)
Yes. Rack ears are attached using the holes plugged by those caps.
Hope this helps!
Chris
wrote:
>(I'm guessing this is simply because it needs more power than the
> the following questions came up:
>
> ---
>
> The Blue Voice has two cable braids running to the power supplies
other panels?), the CV2 and Soup Kitchen each have one cable braid.
The TKB has two braids, only one of which has a connector that fits
the power supply board. What's the other cable for?
On voice panels, Rex often isolates the supply line to the VCOs.
The second TKB braid is intended to route the A through D outputs
directly to a Quantizer (TKB) on another panel. The CV1 includes
this module and typically would have a plug that mates with yours.
> So that would mean the PS4 can't handle the four panels byNot sure about this one - I would ask Rex, although I suspect his
> itself?
purchase advice tells you a lot - but you might consider using the
PS2 to power the Voice panel for the time being.
> Most of the voltages on the Serge are positive only, right? So allthe voltages from the Random Source and DTG are all in the positive
domain? And only the black outputs on the DSG and the Quadrature Osc
go into negative too?
On the Serge, black jacks are bipolar while blue are DC-coupled. I
believe you can use a processor to offset the positive bias. Due to
bipolar attenuators on most VC inputs this is rarely necessary.
> The boxes all have two holes on each side covered by little blackplastic caps. If one were to rack mount the boxes, is this where the
rack ears would be attached? (They're "low profile" boxes, BTW)
Yes. Rack ears are attached using the holes plugged by those caps.
Hope this helps!
Chris