The power is just bussed on the distro board, so you can connect the source
and destination anywhere. Ideally, just in case of small loss on the board,
you would put the source towards the middle.
Some panels require additional power connections. I believe the concern
from Rex is more about the integrity of the power and ground signals than
the current capability of the wires.
My PS4 has just one XLR cable from the box, so yours must be a PS6 or
larger.
John Loffink
The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com
The Wavemakers Synthesizer Web Site
http://www.wavemakers-synth.com
and destination anywhere. Ideally, just in case of small loss on the board,
you would put the source towards the middle.
Some panels require additional power connections. I believe the concern
from Rex is more about the integrity of the power and ground signals than
the current capability of the wires.
My PS4 has just one XLR cable from the box, so yours must be a PS6 or
larger.
John Loffink
The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com
The Wavemakers Synthesizer Web Site
http://www.wavemakers-synth.com
> -----Original Message-----
> From: SergeModular@yahoogroups.com [mailto:SergeModular@yahoogroups.com]
> On Behalf Of Bakis Sirros
>
> the distro boards have 6 connectors each. i connect
> the cable coming from the psu to any of these 6
> connectors and i connected the panels to be powered to
> the rest of the 6 connectors of the distroboard?
>
> also, two panels have two or even three power cable
> coming from their back (instead of one). why is this?
> do i connect all 3 or 2 wires of the same panel to the
> same distro board, or should i connect to different
> distro boards?
>
> also the psu i received, has 4 "xlr-srtyle" type
> connectors on its front. is that a ps6?
>
> waiting for a reply before i connect anything...
>