some vc-switches need an X volts voltage to switch between the two inputs (staying at input 2 as long as the voltage is X volts high) and not a trigger to go from input 1 to input 2.
if a switch needs a trigger to switch between its inputs then it would be a clocked switch.
Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
www. parallel - worlds - music. com
www. myspace. com/ parallelworldsmusic
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. musicamaximamagnetica. com
www. shimarecords. co. uk
www. rubberrecords. gr
Athens - Greece
--- On Wed, 12/17/08, Carlos <bushwick@...> wrote:
From: Carlos <bushwick@...>
Subject: [SergeModular] Re: patching VC switch? (combining sequencer rows to get more steps)
To: SergeModular@yahoogroups.com
Date: Wednesday, December 17, 2008, 9:37 PM
how would you patch the ACPR so that it will automatically switch to
the other input at the end of a number of stages? would need a
constant 5 volt input to do that no? a switch just needs a pulse to
change inputs?
--- In SergeModular@ yahoogroups. com, Bakis Sirros
<synth_freak_ 2000@...> wrote:
>
> you can make a vc-switch (2 in - 1 out) with an ACPR.
>
> btw, any other ideas how to make a vc-switch with Serge modules?
>
> Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
> [Doepfer_a100] group owner
> www. parallel - worlds - music. com
> www. myspace. com/ parallelworldsmusic
> www. myspace. com/ interconnectedmusic
> www. myspace. com/ memorygeist
> www. DiN. org. uk
> www. musicamaximamagneti ca. com
> www. shimarecords. co. uk
> www. rubberrecords. gr
> Athens - Greece
>
> --- On Wed, 12/17/08, Carlos <bushwick@.. .> wrote:
>
> From: Carlos <bushwick@.. .>
> Subject: [SergeModular] patching VC switch? (combining sequencer
rows to get more steps)
> To: SergeModular@ yahoogroups. com
> Date: Wednesday, December 17, 2008, 7:57 PM
>
>
>
>
>
>
>
> Is there a way to patch a VC switch in the current m-class or with
the
> regular panels?
>
> my thinking is that if I had a VC switch in combination with a pulse
> divider I could send values from the sequencer or sequencer
programmer
> and extend the number of steps by combining rows together. (using
the
> clock into the pulse divider to figure out when is time to change
each
> row being input into the switch)
>
> of course if there is an easier method of doing this I will like to
> hear it.
>
> C.
>