In a message dated 12/11/01 9:18:07 PM, 8brain@... writes:
<< So I see you're getting a mixer-only panel. Do you mind telling me which
modules you chose for it? >>
It took me awhile to realize the importance and utter necessity for mixers
and crossfaders in my system. As a consequence, i have Mix2's and crossfaders
strewn all across my system. I have one panel that is just a QVM and a
Matrix Mixer and some XFads and some Quadratures.
One of the panels that is being built now has the following:
QVM/XFad/XFad/Mix2/ADSR/ADSR/QUO/QUO
this may not make much sense unless you see where it sits in the system.
Because of the size of this thing, I've broken down into sections that have
certain functions(more or less). The last section will have a two panel
Mixer/VCA function.
These two panels will sit on top of each other with the following
configuration.
Top panel, left to right:
Mix2 / XFAD / Mix2 / XFAD / XFAD / XFAD / XFAD / XFAD / QUO / QUO / QUO
Lower panel left to right:
QVM / ADSR / DSG / NCom / ADSR / QVM
again, this might not make much sense untill you see where it sits and in
fact, the bottom panel is still being massaged so to speak.
I like to swing things around alot so the XFADs and Quadratures are
prominent in my system.
So there ya have it. It's pretty basic. I don't have any specific needs
that would call for any Mods in the mix/output section. I have a couple
simple mods in the generator and Oscillator sections but that's it.
<< So I see you're getting a mixer-only panel. Do you mind telling me which
modules you chose for it? >>
It took me awhile to realize the importance and utter necessity for mixers
and crossfaders in my system. As a consequence, i have Mix2's and crossfaders
strewn all across my system. I have one panel that is just a QVM and a
Matrix Mixer and some XFads and some Quadratures.
One of the panels that is being built now has the following:
QVM/XFad/XFad/Mix2/ADSR/ADSR/QUO/QUO
this may not make much sense unless you see where it sits in the system.
Because of the size of this thing, I've broken down into sections that have
certain functions(more or less). The last section will have a two panel
Mixer/VCA function.
These two panels will sit on top of each other with the following
configuration.
Top panel, left to right:
Mix2 / XFAD / Mix2 / XFAD / XFAD / XFAD / XFAD / XFAD / QUO / QUO / QUO
Lower panel left to right:
QVM / ADSR / DSG / NCom / ADSR / QVM
again, this might not make much sense untill you see where it sits and in
fact, the bottom panel is still being massaged so to speak.
I like to swing things around alot so the XFADs and Quadratures are
prominent in my system.
So there ya have it. It's pretty basic. I don't have any specific needs
that would call for any Mods in the mix/output section. I have a couple
simple mods in the generator and Oscillator sections but that's it.