SergeModular

On Nov 3, 2004, at 8:03 AM, synpro@... wrote:

> "To get the stepped section to oscillate this way,
> though, you also have to supply a stream of pulses to SAMPLE."
>
> Ahh...that was the part that I was missing and forgot. You can patch
> the OUT into the CYCLE but unlike the Smooth section you need to feed
> somthing fairly constsant into the INPUT. I will try sending in the
> S/H Source and then I should get a standard sample hold with the Rate
> determining the rate and the CV IN determining the size of the steps.
>
> Thanks for the help!
>
> -Andrew

---------------------------------------------
Robert A. Hearn
rah@...
http://www.swiss.ai.mit.edu/~bob/

--- In SergeModular@yahoogroups.com, Bob Hearn <yahoo@h...> wrote:
> Be careful - CYCLE and OUT are both outputs (in spite of the fact that
> CYCLE is confusingly drawn as an input in the Gold book). You don't
> want to patch them together!
>
> Bob
>
> On Nov 3, 2004, at 8:03 AM, synpro@a... wrote:
>
> > "To get the stepped section to oscillate this way,
> > though, you also have to supply a stream of pulses to SAMPLE."
> >
> > Ahh...that was the part that I was missing and forgot. You can patch
> > the OUT into the CYCLE but unlike the Smooth section you need to feed
> > somthing fairly constsant into the INPUT. I will try sending in the
> > S/H Source and then I should get a standard sample hold with the Rate
> > determining the rate and the CV IN determining the size of the steps.
> >
> > Thanks for the help!
> >
> > -Andrew
>
> ---------------------------------------------
> Robert A. Hearn
> rah@a...
> http://www.swiss.ai.mit.edu/~bob/