SergeModular

Hi,
My two panel Serge system was quite heavily modded but I removed most
of the mods exept some of the most useful and also put in a few mods
myself to cover all the holes in the panels!

My DSG's are modded with cycle switches and also a switch for
connecting the output to VC input to get nonlinear envelope shapes. No
jacks are removed, the switches are in new holes.

I have two PCO's and thy have a switch to connect the 1V/Oct inputs
together.

My 7 stage sequencer programmer/quantizer had about a dozen extra jacks
and pots installed (scaling and a two 4-bit binary counters were
installed), I removedall of the mods there so I have a lot of holes to
fill.
The stage select buttons were very worn so I replaced them with new
ones with a led in to indicate active stage.
I'm planning to add a VCLFO to free up a DSG for clock, and trigger out
from each stage but I need to come up with a few more functions to cover
up the holes.

Also, yesterday while practicing for a gig I noticed that the VCA's in
the UAP have very high gain, they are propably modded as well! I have to
look into that one too...


/Daniel