SergeModular

Frank,

If you are referring to the pots (potentiometers), they were all Allen-Bradley from that
period. If you are referring to the knobs, I don't know where we sourced them from. There were
three different sizes that we were using at the time. Serge thought that as the panels got
smaller due to the 8 vs. 6 hole spacing, that smaller knobs were needed for the fingers to fit in.
This was especially true with the 2 space mixer and others with several pots up and down in a
line.

Stephen




What kind (brand, manufacturer, specs) of knobs and pots (pot shafts)
were used on the paper faced Serge panels built in the early days.
The knobs were NOT the Davies which are used for some time now.

The pots on my 4 panel Serge system have 2 different sizes in
diameter, very small ones (1/8``?) and the larger - typical Serge -
ones.
The larger knobs look a little bit Buchla-esk and the smaller knobs
seem to be rather cheap with no markers.


____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs