Vintage Simmons Drums (UK) Users Group

That's not the same nut I have ( again, weird sounding !?!?! ). The T-nuts I'm referring to are from the 7/8" pearl tom mounts BT-3 that would be screwed to a shell. I looked it up, and the BT-3 mount is the same, but they changed the T-nut ( SOB !! ). Now I wish I would have ordered some. I guess it's possible that there's a few around somewhere. BTW, I just tried one of the Pearl nuts that I have and it worked fine on a V pad. I don't think it will work on the others though.


- Roland


---------- Original Message ----------
From: "monzarottie" <roger.davis@...>
To: Simmons_Drums@yahoogroups.com
Subject: Re: [Simmons Drums] Source for SDSV, 7, 8 pad T-handle nuts
Date: Fri, 01 May 2009 23:53:19 -0000



Ah,
I see what you mean.
http://uk.shopping.com/xPO-Pearl-UGN-6-Fluegelmutter-M6

--- In Simmons_Drums@yahoogroups.com, "blacklodgeed" <edrose1@...> wrote:
>
> Pearl does make a nut with the proper threading and a similar design - the Pearl UGN-6/2 - but, unfortunately, it does not work. The barrel is not long enough to properly tension. You could, however, add washers to get it to work.
> It might be worth looking into having some fabricated if there are enough of us to warrant it. I'd be down for a few.
> 
> --- In Simmons_Drums@yahoogroups.com, "monzarottie" <roger.davis@> wrote:
> >
> > Hi Roland, 
> > All is well and same to you. Good to know about the Pearl nuts. I'll pay a visit to some of the local drum shops this weekend to see if I can find some. There's a couple of places in PDX that have loads of old parts. I mostly need them for my SDS7 pads, but can use some from my V's and replace them. Thanks for the advice!
> > 
> > Have a great weekend!
> > 
> > --- In Simmons_Drums@yahoogroups.com, "Roland Brenner" <rolandbrenner@> wrote:
> > >
> > > Hey Roger! Hope all is well !
> > > 
> > > I looked into this as well a while ago. The closest match I could find is the T-Handle nuts that pearl uses for their tom mounts. I had in mind to order extras, but never did. The pearl nuts ( I know, sounds weird !?!?! ) have 2 different diameters on the stem, but ( if memory serves ) have the same threads. They should work for the V's, but I'm not sure about the 7's or 8's. I can measure one of them up for you with a caliper if you need me to. Let me know.
> > > 
> > > 
> > > - Roland
> > > 
> > > 
> > > ---------- Original Message ----------
> > > From: "monzarottie" <roger.davis@>
> > > To: Simmons_Drums@yahoogroups.com
> > > Subject: [Simmons Drums] Source for SDSV, 7, 8 pad T-handle nuts
> > > Date: Tue, 28 Apr 2009 00:16:49 -0000
> > > 
> > > 
> > > 
> > > 
> > > Does anyone know of a source for replacement T-handle nuts in the US for the V, 7 and 8 series pads? I'm missing a few.
> > > 
> > > Many thanks!
> > > 
> > > 
> > > 
> > > __________________________________________________________
> > > Click to learn about options trading and get the latest information.
> > > http://thirdpartyoffers.netzero.net/TGL2231/fc/BLSrjnxUZ1mxg87KdxyQ6U5w8Hj7tths884iXiipdSS5zoHco47zQjBUKmU/
> > > 
> > > [Non-text portions of this message have been removed]
> > >
> >
>



____________________________________________________________
Always a good call. Click now to establish your local phone service!
http://thirdpartyoffers.netzero.net/TGL2231/fc/BLSrjnxTBox4QWZ9EMy0XNNl2T8sCqA8s3bobW6YbM4JMi6X6hsqx1NSQL2/

[Non-text portions of this message have been removed]