Vintage Simmons Drums (UK) Users Group

I managed to get it going... It seemed to have been the coating on the wires had too good insulating properties... :-)

Btw. What's the fuse when set to 240V? Is it 1A/250V?
(When set to 110V it had a 2A/250V fuse)

Cheers
// Lars

--- In Simmons_Drums@yahoogroups.com, "WT" <waveterm@...> wrote:
>
> Unfortunately no, I bought one a long time ago but they don´t seem to have 
> it any longer.
> 
> WT
> 
> ----- Original Message ----- 
> From: "xylofoam" <lars.frisk@...>
> To: <Simmons_Drums@yahoogroups.com>
> Sent: Monday, October 03, 2011 3:50 PM
> Subject: Re: [Simmons Drums] Voltage conversion of the MTM transformer... ?
> 
> 
> Yes, that's exactly what I thought as well...
> Do you know what the outputs are from the secondaries, or perheps even what 
> an Elfa replacement transformer would be ?
> 
> cheers
> // Lars
> 
> --- In Simmons_Drums@yahoogroups.com, "WT" <waveterm@> wrote:
> >
> > Looking at the schematics, you only need to have black and orange ( or 
> > pink
> > for 220V ) connected to the fuse/mains switch.
> >
> > This should work. If it doesn´t the transformer could be toast. You can 
> > get
> > a new one at Elfa.
> >
> > WT
> >
> > ----- Original Message ----- 
> > From: "xylofoam" <lars.frisk@>
> > To: <Simmons_Drums@yahoogroups.com>
> > Sent: Monday, October 03, 2011 1:58 PM
> > Subject: Re: [Simmons Drums] Voltage conversion of the MTM transformer... 
> > ?
> >
> >
> > > Hehe :-D
> > >
> > > // L
> > >
> > > --- In Simmons_Drums@yahoogroups.com, jesper <jesper@> wrote:
> > >>
> > >> xylofoam skrev 2011-10-03 10:20:
> > >> > Hi all,
> > >> >
> > >> > I'm trying to convert the original transformer in my MTM unit from 
> > >> > 110V
> > >> > to 240V... According to the service manual the transformer supports 
> > >> > all
> > >> > voltages on the primary core (all colours match the schematics
> > >> > (black:0V, brown:100V, white:110V, pink:220V and orange:240V)), but
> > >> > when
> > >> > I reconfigure the tranfsformer to EU (240V) I get absolutely NOTHING 
> > >> > on
> > >> > either of the secondaries?!
> > >> > What am I doing wrong? According to the schematics there is only ONE
> > >> > primay core, but are there really TWO that needs to be in serial, or 
> > >> > ?
> > >>
> > >> Sell it to me instead. I have 110-feeds to spare. :D
> > >>
> > >> -- 
> > >> electronically yours, jesper
> > >>
> > >> - -- --- ---- ----- ---- --- -- -
> > >> www.electronic-obsession.se
> > >>
> > >
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> >
> 
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
>