SynthModules

Thanks, Scott, offset is definitely the way to go. The CP-251 mixer section
has an offset voltage knob, so I'll try it.
--
john


----- Original Message ----- 
From: "youdono2001" <scottnoanh@peoplepc.com>
To: <SynthModules@yahoogroups.com>
Sent: Tuesday, March 02, 2004 5:43 PM
Subject: [SynthModules] Re: ASR rewrite


> (Assuming you're using a CP51) -from the on-line manual the LFO
> output is +/-2.5V, which probably isn't enough to the PSIM.  If you
> mult the LFO out to the mixer (which is unity gain) I'd think it'd
> boost the level to +/-5V, which should trigger it (the two
> LFO 'copies' adding together in phase).  Or, if you have a DC source,
> plug that into the mixer to offset it positive so it's swinging fully
> 0-5V.