SynthModules

Cool!  I missed the part in the MF manual about the internal offset (I was figuring from an external source - nice to have it integral!).

Cheers,
Scott

  ----- Original Message ----- 
  From: john mahoney 
  To: SynthModules@yahoogroups.com 
  Sent: Tuesday, March 02, 2004 4:32 PM
  Subject: Re: [SynthModules] Re: ASR rewrite


  It works: Some positive offset on the Moogerfooger LFO makes the PSIM happy.
  --
  john


  ----- Original Message ----- 
  From: "john mahoney" <jmahoney@gate.net>
  To: <SynthModules@yahoogroups.com>
  Sent: Tuesday, March 02, 2004 6:35 PM
  Subject: Re: [SynthModules] Re: ASR rewrite


  > Thanks, Scott, offset is definitely the way to go. The CP-251 mixer
  section
  > has an offset voltage knob, so I'll try it.
  > --
  > john
  >
  >
  > ----- Original Message ----- 
  > From: "youdono2001" <scottnoanh@peoplepc.com>
  > To: <SynthModules@yahoogroups.com>
  > Sent: Tuesday, March 02, 2004 5:43 PM
  > Subject: [SynthModules] Re: ASR rewrite
  >
  >
  > > (Assuming you're using a CP51) -from the on-line manual the LFO
  > > output is +/-2.5V, which probably isn't enough to the PSIM.  If you
  > > mult the LFO out to the mixer (which is unity gain) I'd think it'd
  > > boost the level to +/-5V, which should trigger it (the two
  > > LFO 'copies' adding together in phase).  Or, if you have a DC source,
  > > plug that into the mixer to offset it positive so it's swinging fully
  > > 0-5V.
  >



  Be sure to check out the primary Web site at:
  http://www.SynthModules.com




------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/SynthModules/
      
    b.. To unsubscribe from this group, send an email to:
    SynthModules-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]