SynthModules

My primary interest if to store high resolution data on a MIDI 
recorder. Pitch bend is a 14 bit data type. If you store 4 channels 
of pitch bend data, and can decode 4 channels of pitch bend 
data, you have a high resolution 4 channel control voltage 
recorder which can be edited graphically with unlimited lenght 
sequences.

Could be useful...

--- In SynthModules@yahoogroups.com, "Mike Marsh" 
<mmarsh@w...> wrote:
> Here here!
> 
> --- In SynthModules@yahoogroups.com, "drmabuce" 
<drmabuce@y...> wrote:
> > Hi Mark
> >  BTW while i'm thinking about it, THANX for all the terrific 
> content you've put on the web over the years. You are truly one 
of 
> the guys who made the internet-era analog renaissance fun for 
> all...Kudos!
> > 
> > 
> > --- In SynthModules@yahoogroups.com, Mark Pulver 
<mark@m...> wrote:
> > 
> > >  >how reliably PEEK & POKE work
> > > 
> > > 'k. What you may be seeing is that you've picked an 
address which 
> is 
> > > actually a memory mapped port, so the data at the 
"address" would 
> change.
> > > 
> > > How did you pick the memory address to poke at?
> > 
> > I don't know if you saw my reply to Grant, but I was mistook!
> > PEEK & POKE work fine - they default to 8b Bytes. (I had my 
> variable typed incorrectly) But you have only 2k of memory to 
work 
> with (f780 to FFFF) 
> > 
> > > 
> > > Right... Which kinda' circles back to how fast you can move 
> memory; how 
> > > deep the INT buffer is on the H8; what the inherent 
overhead of 
> an ISR is 
> > > (in relation to moving data fast enough to keep up with pitch 
> tracking); etc.
> > > 
> > >
> > Plus... assembler support is still pretty vaporous....
> > besides
> > I have Kenton boxes that do a ripping job of MIDI->CV !
> > and thus insufficient motivation to climb this glass hill (again) 
I 
> did one commercial MIDI-imp in the 80's and swore to gouge 
out my own 
> eyes if I ever even THOUGHT of doing it again! 
> > I like the PSIM for the unique things it does. IMHO a 
dedicated 
> MIDI-CV box yields much more bang/buck - and that frees up 
the PSIM 
> to do envelope generation with time ranges measured in 
HOURS or LFO's 
> based on fractal curves (which the Kenton doesn't do very 
well...) 
> > ;'> 
> > 
> > > 
> > > heh... All of my free time would be gone if I had my PSIM...
> > > 
> > > ...in fact, I'd be tempted to bring it to work and create "free 
> time" here 
> > > to play with it. :)
> > 
> > hmmmmmmmmmm,
> > just mount it in a discarded zip drive housing.....
> > THANX!
> > 
> > best-
> > -doc