SynthModules

Hello everyone.  I haven't gone anywhere.  Andrew K. was supposed to 
send an update a couple weeks ago but it looks like that didn't 
happen.  My server went away (after co-locating it in the same place 
since 1994) and I had to put a new one online which is why my emails 
may have been bouncing and the site was down for about a week.  
Anyway, several modules have shipped since my last update and I am 
planning on working all weekend long on getting another bunch 
shipped Monday.  All that remains on the remaining modules is wiring 
from the jacks to the PCB and testing.

I am so sorry this has taken so long.  I have every intention of 
shipping every last module.  You will get your modules.  It will not 
be much longer.  I know your patience has long since ran out.  Just 
a bit more please...

I'll give another update on Monday with how many shipped and how 
many are remaining.

Please understand there have been many circumstances beyond my 
control that have led to serious delays in shipping.  For that, I am 
truly sorry.  But also understand you will get your modules and I 
hope we can all come together as a community once again and enjoy 
them.

Best regards,
Brice

"synthmodules" <bdh@...> wrote:

>
> 
> I'll give another update on Monday with how many shipped and how 
> many are remaining.
>  
> Best regards,
> Brice
>

On 9/22/06 10:48 AM, "synthmodules" <bdh@cyberbound.net> wrote:

> I'll give another update on Monday with how many shipped and how
> many are remaining.

? which "Monday" did you mean? 9/25/2006? or...?
still haven't seen an update, did I miss it?

On 9/22/06 10:48 AM, "synthmodules" <bdh@cyberbound.net> wrote:

> 
> I'll give another update on Monday with how many shipped and how
> many are remaining.

still waiting.

yes how many are still waiting?


gary



"p. hendricks" <ph@...> wrote:

>
> On 9/22/06 10:48 AM, "synthmodules" <bdh@...> wrote:
> 
> > 
> > I'll give another update on Monday with how many shipped and how
> > many are remaining.
> 
> still waiting.
>

On 9/22/06 10:48 AM, "synthmodules" <bdh@cyberbound.net> wrote:

> I'll give another update on Monday with how many shipped and how
> many are remaining.

Brice? over a month later? still no update?
you ok? did i miss an update?
anyone received theirs? in the last 3 months? 6 months?
year? please speak up! thanks!

Brice, please, we need an update. 4-6 weeks was your quoted ship time when
we entered this contract. Now, it seems that's not enough time to even get a
reply. Please clarify and request approval if there is a change of terms.
-phil

> you ok? did i miss an update?


No, I'm not ok.  I've been in and out of the hospital several times and now 
have pneumonia.  Sorry for the lack of updates.  I once again entrusted 
Andrew K. to supply an update and it looks like he didn't come through for 
me.  I'm in the process of trying to find someone to help me finish the 
remaining modules.  I'll let you all know how that turns out but I wouldn't 
trust just anyone to finish these modules so if he decides to do it... they 
will be just as good as if I had done them.

All that remains on *all* the remaining modules is wiring the 1/8" jacks and 
three switches that are mounted on the panel (the ground wiring between all 
the jacks is already finished) to the PCB and two ICs inserted.  If anyone 
would like their module who is willing to do the final wiring and can't wait 
any longer, please let me know and I'll ship it immediately and throw in a 
serial LCD display.

Due to health issues, I am having difficulty working on them and am doing my 
best.  Every single one of them will get finished and shipped.  There are 18 
modules remaining to ship out of 56.

Gary, yours is a bit more difficult but most of the wiring is already done. 
Since it's the most difficult to wire, I've been working on it off and on. 
It's close.

- Brice

Brice,

Sorry to hear about your health problems - but you need to keep in touch.

gary


--- In SynthModules@yahoogroups.com, "Brice D. Hornback" <bdh@...> wrote:
>
> > you ok? did i miss an update?
> 
> 
> No, I'm not ok.  I've been in and out of the hospital several times
and now 
> have pneumonia.  Sorry for the lack of updates.  I once again entrusted 
> Andrew K. to supply an update and it looks like he didn't come
through for 
> me.  I'm in the process of trying to find someone to help me finish the 
> remaining modules.  I'll let you all know how that turns out but I
wouldn't 
> trust just anyone to finish these modules so if he decides to do
it... they 
> will be just as good as if I had done them.
> 
> All that remains on *all* the remaining modules is wiring the 1/8"
jacks and 
> three switches that are mounted on the panel (the ground wiring
between all 
> the jacks is already finished) to the PCB and two ICs inserted.  If
anyone 
> would like their module who is willing to do the final wiring and
can't wait 
> any longer, please let me know and I'll ship it immediately and
throw in a 
> serial LCD display.
> 
> Due to health issues, I am having difficulty working on them and am
doing my 
> best.  Every single one of them will get finished and shipped. 
There are 18 
> modules remaining to ship out of 56.
> 
> Gary, yours is a bit more difficult but most of the wiring is
already done. 
> Since it's the most difficult to wire, I've been working on it off
and on. 

> It's close.
> 
> - Brice
>

Brice,

I will take you up on your offer - please send the module in its
present state!  I will gladly finish it.

Gary




"Brice D. Hornback" <bdh@...> wrote:
>
> 
> Gary, yours is a bit more difficult but most of the wiring is
already done. 
> Since it's the most difficult to wire, I've been working on it off
and on. 

> It's close.
> 
> - Brice
>