Synth-DIY Yahoo! Groups Archives

Thread

Four stage quantized sample & hold uploaded

2004-05-31 by djbrow54

It's been a bit quiet so I thought I'd upload another program.

I tried to add additional analog stages to my MOTM-101 S&H to have an
analog shift register.  The LF398 samples on the level instead of the
edge so the signal just propagates through all the stages.  So,
what's one to do?  Write some code for the PSIM, of course.

This is a single channel S&H that samples on the rising edge of the
clock.  It samples and quantizes the output on the first stage and
shifts the other outputs over one stage (1 to 2, 2 to 3, 3 to 4). 
It's nice for some cascading effects.

Enjoy 
Dave

PSIM-1 Module Available

2004-05-31 by Brice D. Hornback

I have one SynthModules PSIM-1 module that is available.  I was planning on
keeping this one for myself, but something came up and need to sell it.
There are a couple slight machining marks on the front panel from where a
couple of the holes were machined (slight swirlies - not deep) that are not
very noticeable... but are there.  If I don't have to mess with replacing
the panel, I'll sell it at a discount.

$289 shipped - payment by PayPal only.

I am still building the last batch so delivery would still be a few weeks
out (as this will be the last module to be built and shipped)... but you
would get one much sooner than waiting for another production run which will
probably be in the 3 to 6 month time frame.

The first person to reply to this email OFF LIST gets it.

Thanks,
Brice
http://www.SynthModules.com

Re: [SynthModules] PSIM-1 Module Available (SOLD)

2004-05-31 by Brice D. Hornback

It has been sold.

- Brice
http://www.SynthModules.com

----- Original Message ----- 
From: "Brice D. Hornback" <synthmodules@synthmodules.com>
To: <SynthModules@yahoogroups.com>
Sent: Monday, May 31, 2004 9:02 AM
Subject: [SynthModules] PSIM-1 Module Available


> I have one SynthModules PSIM-1 module that is available.  I was planning
on
> keeping this one for myself, but something came up and need to sell it.
> There are a couple slight machining marks on the front panel from where a
> couple of the holes were machined (slight swirlies - not deep) that are
not
> very noticeable... but are there.  If I don't have to mess with replacing
> the panel, I'll sell it at a discount.
>
> $289 shipped - payment by PayPal only.
>
> I am still building the last batch so delivery would still be a few weeks
> out (as this will be the last module to be built and shipped)... but you
> would get one much sooner than waiting for another production run which
will

Show quoted textHide quoted text

> probably be in the 3 to 6 month time frame.
>
> The first person to reply to this email OFF LIST gets it.
>
> Thanks,
> Brice
> http://www.SynthModules.com
>
>
>
>
> Be sure to check out the primary Web site at:
> http://www.SynthModules.com
>
> Yahoo! Groups Links
>
>
>
>
>

Re: [SynthModules] PSIM-1 Module Available (SOLD)

2004-05-31 by Scott Stites

Damn, that was quick!

Show quoted textHide quoted text

  ----- Original Message ----- 
  From: Brice D. Hornback 
  To: SynthModules@yahoogroups.com 
  Sent: Monday, May 31, 2004 9:11 AM
  Subject: Re: [SynthModules] PSIM-1 Module Available (SOLD)


  It has been sold.

  - Brice
  http://www.SynthModules.com

  ----- Original Message ----- 
  From: "Brice D. Hornback" <synthmodules@synthmodules.com>
  To: <SynthModules@yahoogroups.com>
  Sent: Monday, May 31, 2004 9:02 AM
  Subject: [SynthModules] PSIM-1 Module Available


  > I have one SynthModules PSIM-1 module that is available.  I was planning
  on
  > keeping this one for myself, but something came up and need to sell it.
  > There are a couple slight machining marks on the front panel from where a
  > couple of the holes were machined (slight swirlies - not deep) that are
  not
  > very noticeable... but are there.  If I don't have to mess with replacing
  > the panel, I'll sell it at a discount.
  >
  > $289 shipped - payment by PayPal only.
  >
  > I am still building the last batch so delivery would still be a few weeks
  > out (as this will be the last module to be built and shipped)... but you
  > would get one much sooner than waiting for another production run which
  will
  > probably be in the 3 to 6 month time frame.
  >
  > The first person to reply to this email OFF LIST gets it.
  >
  > Thanks,
  > Brice
  > http://www.SynthModules.com
  >
  >
  >
  >
  > Be sure to check out the primary Web site at:
  > http://www.SynthModules.com
  >
  > Yahoo! Groups Links
  >
  >
  >
  >
  >



  Be sure to check out the primary Web site at:
  http://www.SynthModules.com



        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       


------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/SynthModules/
      
    b.. To unsubscribe from this group, send an email to:
    SynthModules-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]