SynthModules

> Well folks... I'm making progress like crazy now!  Things at work have
> slowed down thus allowing me to spend more time working on the
> modules.  I've also been getting about an hour a day or so in the
> mornings in and actually have today off!  I'm quickly running out of
> parts to stuff and will be soldering soon.  Gallons of distilled water
> are sitting just over there waiting for me.  :)  I'm hoping to get the
> boards finished up today and get the LED boards finished before
> Sunday.  Then, I'll fire up the soldering iron and once I start...
> won't finish until they are all done.  Then, probably another week or
> so to get the panels wired, tested, etc.  I'll be shipping them as
> they are completed (not waiting until *all* of them are wired and
> tested).  Shipping should begin soon.  You folks waiting on the
> "partials" don't have much longer to wait... so dust off those panels
> and dig out the jacks and switches.  ;)
>
> It's a good feeling when all the holes on these boards are almost
> filled up with parts!  hehe 
>
> More later...
> - Brice
> http://www.SynthModules.com
>
>
>
>
> Be sure to check out the primary Web site at:
> http://www.SynthModules.com
>
>
>
> ------------------------------------------------------------------------
> *Yahoo! Groups Links*
>
>     * To visit your group on the web, go to:
>       http://groups.yahoo.com/group/SynthModules/
>        
>     * To unsubscribe from this group, send an email to:
>       SynthModules-unsubscribe@yahoogroups.com
>       <mailto:SynthModules-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>        
>     * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>