SynthModules

This was the first weekend I've been home in several months.  I spent
the entire time programming.  I decided to update all of my programs
to use the LCD display I made for my PSIM.  At a minimum I display
the program name so I know what program is loaded.  I've gone back
to a few and enhanced the programs to use the display.  This is
especially useful for programs where I am selecting or setting
specific parameters.  I updated my LFO program so the display will
show me which waveform is selected (sine, pulse, saw, ramp, triangle)
and the settings for pulse duty cycle (in %) and the offset of
OUT4 (in degrees). It really makes the programs much more friendly.

I also updated one program to display all four OUT voltages to one
decimal point (e.g. 8.7 volts).  I had it running for a while with
two decimal points but the display was too crowded.

I don't know that I spent my weekend in a productive fashion but it
sure was fun.  I even taught my daughter some programming by
coding up a clock using the display.

Photos at
http://modularsynthesis.com/modules/synthmodules/PSIM-Display/PSIM-
Display.htm

Sorry about the long link.

Dave