Howdy!
Yes, that is supposed to say VC Fat, I
just took a pencil to the “G” and turned
it into a “C”, And yes those naughty
silkscreen people printed them all a little
too high, well, at least they got the
mounting holes too narrow, yikes, These
are the very same “professionals” doing
the Motm panels, (good Luck Paul!)
Cynthia
From: The_Cyndustries_List@yahoogroups.com [mailto:The_Cyndustries_List@yahoogroups.com] On Behalf Of Tkacs, Ken
Sent: Monday, May 19, 2008 7:56 AM
To: The_Cyndustries_List@yahoogroups.com
Subject: [The_Cyndustries_List]
MOTM-style Sawtooth Animator
Sorry if this had been asked before… I just received my MOTM-style Sawtooth Animator (thanks!). The first thing I noticed was the name of the second knob -- "VG FAT." Is that a typo? Is that supposed to be "VC FAT," or am I misunderstanding something…?
It also looks like the silk-screening on the panel is about 3/16" too "high," with the word "FAT" at the top very nearly going off the top edge of the module, and all the jack labels being much closer to the jacks above them rather than to the ones they apply to, underneath.