The Cyndustries List

Bakis Sirros wrote:

> hello cynthia,
> i'm glad that all these adjustments are being made
> now, so when i receive my euro ZO, it will fit nice
> and correct to my doepfer a100 rack!
> keep up the good work,
> best regards,
> bakis.

Thanks Bakis!

Cynthia


>
>
>
>
> --- Cynthia <cynthia.webster@gte.net> wrote:
>
> > We have discovered a couple of difficulties with the
> > present mechanical fit of the
> > Euro Format Zeroscillators and have thus suspended
> > Euro format shipments for a
> > week or so while we make the necessary adjustments.
> >
> > 1. The depth of the Zeroscillator in it's present
> > form is too deep for the
> >    Doepfer Euro Rack becuase it interferes with the
> > Doepfer power distro card
> >    that runs horizontally across the middle of the
> > rackspace.
> >
> >    Note: This only affects Doepfer Euro Racks,
> >    Analogue Systems racks are fine in this regard.
> >
> >    The Fix: We have designed a backplane right-angle
> > card that shortens the
> >    Zeroscillator by 1.5" inches, they are in the
> > soup, and the boards should be
> >    here and built within the next week or so.
> >
> >
> > 2. The circuit board immediately behind the Euro ZO
> > front panel is just a
> >    tiny bit too long at the bottom, and interferes
> > with both brands of racks.
> >
> >     The Fix: Our original PCB design easily allows
> > for this adjustment,
> >    we just have to file or mill the edge a bit more
> > than we already are, and
> >    mount the Vari-Synch pots in their alternate PCB
> > mounting holes.
> >
> >
> > Most Euro ZOs will fit, (albeit tighthly) into an
> > Analogue Systems Euro Rack,
> > but none of them will fit a Doeper Euro Rack
> > properly until we make the
> > above adjustments.  Thankfully these two issues are
> > simple to fix.
> >
> > 1. Because of all of the case swapping, there has
> > also been a lot of power
> >    connector swapping.  We sent the first units out
> > with Doepfer 10-pin
> >    power cables, but it seems that customers want
> > the 16-pin Doepfer cables
> >    instead.  Also provision must be made swap over
> > to the Analogue Systems
> >    power connector more easily.
> >
> >    The Fix:  We are changing over to the Doepfer
> > 16-pin power connector
> >    on the Zeroscillator instead of the 10-pin, (and
> > will impliment the version
> >    with the plastic surround with the polarized
> > keyway).
> >
> >    We will include two power cables so you can have
> > it both ways.
> >
> > Thank you to our Customers who have been so patient
> > that last few weeks,
> > we needed the time to send a few units out, get some
> > feedback, and then
> > some time to properly digest that feedback and
> > design the solutions.
> > The upgrates are already underway, and shipping will
> > resume quickly.
> >
> > To those who have already received their Euro ZOs,
> > we will contact you
> > in the next week to resolve these issues to your
> > total satisfaction guaranteed.
> >
> > There will be some delay of all format Zeroscillator
> > shipments during this
> > brief interval while we focus on these quick
> > adjustments.
> >
> >
> > Thanks for your support!
> >
> >
> > Cynthia
> >
> > http://www.cyndustries.com/
> >
> >
> >
> >
>
>
> Bakis Sirros - Parallel Worlds
> [Doepfer_a100] group owner
> http://www.parallel-worlds-music.com
> http://www.shimarecords.co.uk
> http://www.rubber.gr
> Athens-Greece
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
> SPONSORED LINKS
> Electronic instrument 
> <http://groups.yahoo.com/gads?t=ms&k=Electronic+instrument&w1=Electronic+instrument&w2=Electronic&w3=Instruments&c=3&s=60&.sig=yKCI41gFAtwsab89q3bPXw> 
> 	Electronic 
> <http://groups.yahoo.com/gads?t=ms&k=Electronic&w1=Electronic+instrument&w2=Electronic&w3=Instruments&c=3&s=60&.sig=jZvEhIzmAAvCxBXPHvSBmA> 
> 	Instruments 
> <http://groups.yahoo.com/gads?t=ms&k=Instruments&w1=Electronic+instrument&w2=Electronic&w3=Instruments&c=3&s=60&.sig=q82fdLbSzQUyL7ZSwtBuCA> 
>
>
>
> ------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
>     *  Visit your group "The_Cyndustries_List
>       <http://groups.yahoo.com/group/The_Cyndustries_List>" on the web.
>        
>     *  To unsubscribe from this group, send an email to:
>        The_Cyndustries_List-unsubscribe@yahoogroups.com
>       <mailto:The_Cyndustries_List-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>        
>     *  Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>
> ------------------------------------------------------------------------
>