Akai S1000 / S1100 samplers group photo

Yahoo Groups archive

Akai S1000 / S1100 samplers

Index last updated: 2026-04-28 23:15 UTC

Message

Re: Replacement disk drive for S-1100

2005-04-21 by abcdphilippe

Go on Google and type : TEAC FD-235HF (its him ).
Some shops in Germany have them




--- In akaiS1000S1100Samplers@yahoogroups.com, Nick Litzow 
<nicklitzow@y...> wrote:
> Hi,
>  
> I know this is from a while ago, but i was wondering if you had any 
luck getting a replacement drive for your sampler? i have an s1000 
and i had a similar issue with jumper-less new pc disk drives. 
couldn't find one with jumpers anywhere, even on old pre-pentium 
computers.
>  
> any guidanace would be greatly appreciated.
>  
> cheers,
> Nick
>  
> Hallvard Tangeraas <my_list_address@y...> wrote:
> aneurysmhook wrote:
> 
> >The info in the link that was given in previous response has all 
the 
> >jumper settings you need.
> >  
> >
> Yes, I know. But most PC drives these days don't have jumpers any 
longer.
> The drive 1/drive 0 (master/slave) issue is no problem -I've done 
this 
> myself, modifying a standard Sony PC drive for use with an Atari ST.
> It's usually a zero-Ohm resistor and marked "DS" (drive select) as 
far 
> as I can remember on the circuit board.
> 
> Is the "RDY" (ready) signal usually marked on most PC floppy drives 
so 
> they can be modified even if there isn't any jumper available?
> 
> 
> Hallvard
> 
> Yahoo! Groups SponsorADVERTISEMENT
> 
> 
> ---------------------------------
> Yahoo! Groups Links
> 
>    To visit your group on the web, go to:
> http://groups.yahoo.com/group/akaiS1000S1100Samplers/
>   
>    To unsubscribe from this group, send an email to:
> akaiS1000S1100Samplers-unsubscribe@yahoogroups.com
>   
>    Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service. 
> 
> 
> 
> 
> ---------------------------------
> Find local movie times and trailers on Yahoo! Movies.

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.