>
> The SCSI works fine with ZIP drive and JAZ, but does not read CD-ROM :( Are there any special settings/requirements for CD-ROM drives?
>
> Any idea?
>
> --- In akaiS1000S1100Samplers@yahoogroups.com, "tomas_peterka" <a.tom.x@> wrote:
> >
> > Hi,
> >
> > there is no SCSI connector inside, just the external centronics on the rear of S1000. I´ll check the exact part number.
> >
> > Tomas
> >
> > --- In akaiS1000S1100Samplers@yahoogroups.com, "jaumemod" <jaumemod@> wrote:
> > >
> > >
> > > Where you have connected the CD ROM drive? In the external connector or inside on board?
> > >
> > >
> > > --- In akaiS1000S1100Samplers@yahoogroups.com, "tomas_peterka" <a.tom.x@> wrote:
> > > >
> > > > Hi,
> > > >
> > > > I have S1000 with SCSI board, OS3.0. I can not read any of my CD-ROMs (I used the same Toshiba drive with Kurzweil K2000, Apple Mac SE and my older Akais S3200XL several years ago).
> > > >
> > > > When the CD-ROM drive is on and S1000 is then switched on, the LED on the CD-ROM light up and the drive starts to make a noise (disk is rotating). Then "Waiting for hard disk ready" appears on the S1000 and CD-ROM drive stops to do anything.
> > > >
> > > > There are three jumpers on the SCSI board. One is switched off.
> > > >
> > > > I used to have S3200XL with the blown fuse problem (replaced and worked for years then). Is there the same system in S1000? Where is the fuse?
> > > >
> > > > Tomas
> > > >
> > >
> >
>
