Analogue-sequencer

On Sat, 10 Apr 2004, Andy Wilson wrote:

> OK, so it appears that you have your ICs in sockets. That's good. Try removing them
> all, except the regulator, and power up again. Measure the output voltage of the
> regulator. What do you get?
>
> If it's the required +5V, then the reg is working and there is no short across the rails
> on the board.
>
> Next remove the power and start inserting ICs. You could start with the micro, just

thanks andy (and paul)... i'll try this tonight or tomorrow...

bleep.
out.

---
http://leichenfeld.iuma.com
http://thirdwavecollective.com