Analogue-sequencer

Folks,

I've uploaded a photo and FPD file of a new desktop panel for P3.
This layout has the boards as close together as possible, with the 
keypad, display, DATA and TEMPO pots moved up a little to minimise 
the panel height too. It also finally has the PLED aperture exactly 
centred over the display characters.
I'm going to bend some aluminium sheet for a rear enclosure, and 
hold it all together with some wooden end-cheeks.
The FPD file may be a useful source of measurements for anyone 
wanting to machine their own panel, or to get one from Schaeffer. 
The panel will cost 74 euro plus shipping.
Note that I use 7mm holes for mounting the data and tempo pots, but 
7.5mm holes for the step pots, and they need a little extra room to 
fit when they're all mounted in the boards.

Cheers,
Colin f