Analogue-sequencer

> i didn't get that with the midi ports, the ribbon cable is like the red
one is ground and then cable 1; 2; 3; and so on?
> Please help!
> www.magdesign.ch/SeqForm/Midi.jpg

You want to wire the sockets directly to the ribbon cable, yes ?
The red wire is pin 1, which is ground, but all the odd numbered wires are
ground.
You should wire the sockets as follows:

Ribbon cable wire 2  => DIN SYNC PIN 3
Ribbon cable wire 3  => DIN SYNC PIN 2
Ribbon cable wire 4  => DIN SYNC PIN 1
Ribbon cable wire 10 => MIDI OUT PIN 5
Ribbon cable wire 11 => MIDI OUT PIN 2
Ribbon cable wire 12 => MIDI OUT PIN 4
Ribbon cable wire 14 => MIDI IN PIN 4
Ribbon cable wire 16 => MIDI IN PIN 5

> the case is still not finished, the guys from the cnc center aren't so
fast, but have a look:
>
> http://www.magdesign.ch/SeqForm/Seq_01.jpg
> http://www.magdesign.ch/SeqForm/Sideview.jpg

The knobs above the display make it look like a robot face to me.
You need a 'Bender' graphic on there ;-)
Nice.

Cheers,
Colin f



________________________________________________
Message sent using UebiMiau 2.7.2