Analogue-sequencer

thanx, 
but i still get no signal @ midi out
is there any self test function on the p3?
the midi clock is turned on!

only way i see is to put a signal on midi in, switch to thru
and if still nothing comes out i'll be a bit angry.... :-(

any tips and tricks? can i messure the output with a voltmeter or
somethin?

thanx for any help

-wrote:
> You want to wire the sockets directly to the ribbon cable, yes ?
> The red wire is pin 1, which is ground, but all the odd numbered 
wires are
> ground.
> You should wire the sockets as follows:
> 
> Ribbon cable wire 2  => DIN SYNC PIN 3
> Ribbon cable wire 3  => DIN SYNC PIN 2
> Ribbon cable wire 4  => DIN SYNC PIN 1
> Ribbon cable wire 10 => MIDI OUT PIN 5
> Ribbon cable wire 11 => MIDI OUT PIN 2
> Ribbon cable wire 12 => MIDI OUT PIN 4
> Ribbon cable wire 14 => MIDI IN PIN 4
> Ribbon cable wire 16 => MIDI IN PIN 5
> 
> > the case is still not finished, the guys from the cnc center 
aren't so
> fast, but have a look:
> >
> > http://www.magdesign.ch/SeqForm/Seq_01.jpg
> > http://www.magdesign.ch/SeqForm/Sideview.jpg
> 
> The knobs above the display make it look like a robot face to me.
> You need a 'Bender' graphic on there ;-)
> Nice.
> 
> Cheers,
> Colin f
> 
> 
> 
> ________________________________________________
> Message sent using UebiMiau 2.7.2