Analogue-sequencer

When sending the sysex file  I get a "Bad block!X" message on my display...

Colin f wrote:

> > > Could be a dodgy pot. I had a similar problem with the note pot on
> > > step 11. After swapping out the errant alpha pot, all came good
> > > again.
> >
> > it could be that, or if you have an older OS (like the one that comes
> > burned on the CPU) that might be the problem too...
>
> I would guess at a combination of the older OS and too long a ribbon cable
> as the probable cause if the pot changes happened across a number of
> different pots.
> If it's just the one step that's doing it, it's more likely to be the one
> bad pot.
>
> One unforseen problem with the newer OS is that it can hide a bad pot...
> I'll maybe add a diagnostic mode so you can check for a bad pot.
>
> Cheers,
> Colin f
>
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> <http://us.ard.yahoo.com/SIG=129a6rh25/M=273541.4247512.5496808.2248467/D=grplch/S=1705032144:HM/EXP=1098541431/A=2061551/R=0/SIG=11sr5b9n1/*http://launch.yahoo.com/artist/videos.asp?artistID=1001301> 
>
>
>
> ------------------------------------------------------------------------
> Yahoo! Groups Links
>
>     * To visit your group on the web, go to:
>       http://groups.yahoo.com/group/analogue-sequencer/
>        
>     * To unsubscribe from this group, send an email to:
>       analogue-sequencer-unsubscribe@yahoogroups.com
>       <mailto:analogue-sequencer-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>        
>     * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>