Analogue-sequencer

same with my p3 => bad block (there is no midiloop!)

any tips for upgrading p3 with mac osX?
its seems that i have to remove r3.....


mag


--- Colin f <colin@colinfraser.com> wrote:

> 
> > When sending the sysex file  I get a "Bad block!X"
> message on 
> > my display...
> 
> Any chance you have a midi loop ?
> P3 sends a sysex 'acknowledge' for each code block
> it receives - if this
> loops back through and P3 sees it, it will display
> bad block.
> 
> If that isn't the problem, it could be the
> opto-isolator. Some 6N139s work
> OK for short midi messages (notes etc.) but during a
> longer sysex block,
> their output seems to latch up somehow. I'm going to
> switch to 6N137s for
> the next run.
> You can usually get a dodgy 6N139 working by
> removing R3.
> 
> Cheers,
> Colin f
> 
> 
> 
> 
> ------------------------ Yahoo! Groups Sponsor
> --------------------~--> 
> Make a clean sweep of pop-up ads. Yahoo! Companion
> Toolbar.
> Now with Pop-Up Blocker. Get it for free!
>
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/QnLolB/TM
>
--------------------------------------------------------------------~->
> 
> 
>  
> Yahoo! Groups Links
> 
> http://groups.yahoo.com/group/analogue-sequencer/
> 
>     analogue-sequencer-unsubscribe@yahoogroups.com
> 
>  
> 
> 
> 
> 



		
_______________________________
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http://vote.yahoo.com