Analogue-sequencer

Hi Colin,

> 
> Can you confirm you did a complete memory wipe at first power on 
?
> I haven't checked exhaustively, but a bulk dump of data could be 
screwed
> up by inconsistent data that results from not having done a wipe at 
some
> point.

I did, when i first powered up the unit. But I'll do it again anyway.
> 
> I'm probably insulting your intelligence, but you are trying to upload
> the firmware dump using the firmware update mode, rather than 
doing a
> sysex 'recv' from the play mode ?

:->)

Yep, it was in firmware update mode.

> There are two different error messages - SysEx load in the 
firmware
> updater gives a "BAD DATA !" error for a block that doesn't have 
the
> correct structure, or a "BLK CHK Error !" error if the checksum is
> wrong.

Right. Mine definitely came up with 'BAD DATA'
> 
> In bulk dump/receive, the errors are "Bad Block !" for the wrong
> structure, or "ERROR !" for a bad checksum.

I remember seeing the 'ERROR!', can't remember about 'BAD 
BLOCK' I'll check again tonight and report back.

Thanks

Andy
---

Andy Wilson
http://www.techman.synth.net
andy@techman.synth.net