Analogue-sequencer

Colin,

Just upgraded #1037 to 3.1.06B18 (from 06B10), I seem to have a bug on
 the new event groups (sub menu) when I Func+mode from pattern edit
'grab' comes up and Func takes me to 'Inter Track'. I can't seem to
select any grab/swap/push events (its like I can't get down to the
individual event selection). All the other event groups/event
selections work ok - is this a bug or am I doing it wrong? (re-flashed
twice just to make sure)

BTW Like the idea of the event groups but might I suggest that when at
the top menu level (Randomize/Accumulator/Knob Grab etc) the F1
softkey display is changed from 'enter' to Func so the navigation
makes its obvious there is a sub menu, either that or hitting F1 takes
you to the sub menu events - because right now it confusing.

Thanks
Roger


--- In analogue-sequencer@yahoogroups.com, "colinfraser_com"
<colin@c...> wrote:
>
> Folks,
> 
> Those of you running the v3.1.006 beta will have noticed the changes 
> to MIDI thru. As discussed a day or two ago, I've been changing 
> things some more.
> 
> In the current beta, you can either specify a single channel number 
> for all incoming messages to be passed thru on, pass all messages on 
> their original channel, or turn off soft thru altogether.
> You can also choose whether FTS will be applied to thru notes.
> 
> For record mode, you can set a single channel from which notes will 
> be recorded, or record from any/all channels, or set record to 
> automatically receive on the transmit channel of the track selected 
> for record.
> 
> As it stands, if you are not in record mode, and soft-thru is set to 
> pass notes on their original channel (any), notes on the record 
> channel will pass through.
> In the new build, notes on the record channel are not passed thru 
> unless record is active with record mthru on, as this seems more 
> logical to me.
> I wanted to check if this is a problem in a situation I haven't 
> thought of, so it would help if I knew exactly what other people are 
> using the soft-thru options for.
> 
> I've also applied the current PXPos value to notes passed by record 
> mthru, so that the notes passing thru are the same as will play back 
> from a pattern you record into. Otherwise you hear un-transposed 
> notes that then jump when they play back from a pattern if PXPos 
> isn't 0.
> This involved keeping track of all held notes on the record channel, 
> so they can be cleared if the PXPos or FTS settings change. 
> Otherwise you can easily get hung notes.
> It's not practical to do this for the normal soft-thru.
> 
> Anyway, I've posted this beta in the files section now.
> It's p3fw-3.1.006b18 in .syx and .mid format.
> 
> There are various other additions in this build:
> 
>  * new 'xpose by n' event, suitable for unmasking fixed value 
> transposes
>  * FTS scale edit now shows note names relative to current root
>  * aux assignments are shown briefly as you change aux
>  * 'all' paste option pastes notes, auxes and config in one
>  * FUNC+<root> in FTS select toggles black notes between equivalent 
> sharp and flat display. Note names shown in pattern edit follow suit.
>  * if you hold STEP MODE as you switch from GATE to TIE, then 
> activate some ties, as you release STEP MODE it will jump back to 
> GATE. This is for quickly setting ties without having to step 
> through SKIP and Xd to get back to GATE.
> I may extend this mode to provide a method for stretching notes over 
> multiple steps in one go by holding multiple keys...
> 
> One other thing to mention - you can toggle PXPos to be either pre- 
> or post-FTS by holding FUNC while pressing the PXPos key in play 
> mode. An 'F' after the PXPos value indicates FTS will happen after 
> PXPos-ition.
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>