Analogue-sequencer

> the clock-only output on the p3 was
> supposed to address this & let me run a maq with the p3 both as master
> clock & FTS processor. but looping the maq back into the p3 causes the
> aforementioned freezes.
> can't really blame the p3 though- the maq is rather basic both in
> hardware terms & in it's midi implementation, even the later version.

There shouldn't be any problem connecting the P3s clock output back to its
input.
The automatic switching of sync locks out the other source as soon as P3 is
started, whether manually or by incoming MIDI start.
I always have my 303 hooked up so that either P3 or 303 can be manually
started, each one sends sync to the other, and both pass it through.

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com