Analogue-sequencer

perfect timing.  Last night I loaded 3.1.006 by removing the MIDI 
loop (d'oh!).  The update went over but the BAD DATA message appeared 
after the update.  I shut off, turned on ,and it came up showing 
3.1.006 and ran fine.  I played it for several hours with no 
problems.  However, I was workign through the User Guide & I stumbled 
into an advanced menu (apologies, I didn't write it down) and 
suddenly nothing worked, unit was frozen.  Turned off, turned on and 
nothing in the LCD, but the 2 sets of 3 vertical lights were constant 
on.

So, I will try this when I get home.  I did not update the bootloader 
since I was under the impression this was only for newer CPUs and my 
unit is quite old.

But talk about fast service!  Thanks.


--- In analogue-sequencer@yahoogroups.com, "Colin f" <colin@...> 
wrote:
>
>  
> > Hello, my P3 now doesn't boot anymore, all the upper and step 
> > mode leds remain on. Colin, maybe this is the bug you 
> > descreibed before? My unit is pretty new.
> 
> I have uploaded a file called "P3Resurrection.pdf" to the Yahoo 
files
> section.
> This file describes how to use MIDIOx to force a 'dead' CPU to boot 
up
> manually, so that you can install the latest bootloader.
> This should fix the problem.
> Download the file "p3-bootloader-v3.3-AT.syx" and the readme file
> "p3-bootloader-v3.3-AT.txt" as you'll need them also.
> 
> And let me know how you get on...
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>