Analogue-sequencer

Here's what I did.

I opened up Midi OX, turned on my P3, and saw the LED's.


I then opened up the Sysex window from view and typed 55 and then did a 
Send Sysex from the
Command Window menu.  Then I pasted over the top of 55 (so 55 was NOT 
there) the string
that is in the PDF.  I then went and hit Func and Page at the same time, 
and while still holding,
would then have MidiOX send Sysex.

I think the first time that I did nothing was on the screen, then I 
rebooted the box
and tried it again, and this time after sending of the longer string, 
the P3 then displayed
the F1)Boot F3) Flash menu.  I did the boot, so that it would write it 
into the P3 and then
had to load in the OS, before finally booting and seeing my P3 back to 
normal :)


Hopefully it will go as well a for you. Hope this helps a bit.

Dave


synchro1 wrote:
> Same here.  When you send the 55, should you see anything anywhere - 
> either on the P3 or the MIDIOx screens?
>
> I can't tell that anything happens and I have to delete the 55 from 
> the command window before entering the pasted string.
>
> Any help appreciated.
>
> --- In analogue-sequencer@yahoogroups.com, "Miguel Mendoza" 
> <miguel@...> wrote:
>   
>> Hi Colin, unfortunatly it didn't work for me. The unit doesn't 
>>     
> respond to any sysex message or file. The display doesn't show 
> anything and the leds are still on.
>   
>> Any idea?
>>
>> Thanks.
>>
>> Miguel.
>>
>>   ----- Original Message ----- 
>>   From: Colin f 
>>   To: analogue-sequencer@yahoogroups.com 
>>   Sent: Wednesday, April 12, 2006 4:20 PM
>>   Subject: RE: [analogue-sequencer] Updating to 3.1006 do Not boot 
>>     
> anymore
>   
>>
>>   > Hello, my P3 now doesn't boot anymore, all the upper and step 
>>   > mode leds remain on. Colin, maybe this is the bug you 
>>   > descreibed before? My unit is pretty new.
>>
>>   I have uploaded a file called "P3Resurrection.pdf" to the Yahoo 
>>     
> files
>   
>>   section.
>>   This file describes how to use MIDIOx to force a 'dead' CPU to 
>>     
> boot up
>   
>>   manually, so that you can install the latest bootloader.
>>   This should fix the problem.
>>   Download the file "p3-bootloader-v3.3-AT.syx" and the readme file
>>   "p3-bootloader-v3.3-AT.txt" as you'll need them also.
>>
>>   And let me know how you get on...
>>
>>   Best regards,
>>   Colin Fraser
>>   Sequentix Music Systems Ltd
>>   http://www.sequentix.com
>>
>>
>>
>>
>>   SPONSORED LINKS Music sampler  Midi sequencer  Sampler  
>>
>>
>> -------------------------------------------------------------------
>>     
> -----------
>   
>>   YAHOO! GROUPS LINKS 
>>
>>     a..  Visit your group "analogue-sequencer" on the web.
>>       
>>     b..  To unsubscribe from this group, send an email to:
>>      analogue-sequencer-unsubscribe@yahoogroups.com
>>       
>>     c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms 
>>     
> of Service. 
>   
>> -------------------------------------------------------------------
>>     
> -----------
>   
>>
>> [Non-text portions of this message have been removed]
>>
>>     
>
>
>
>
>
>
>
>  
> Yahoo! Groups Links
>
>
>
>  
>
>
>
>