Analogue-sequencer

--- In analogue-sequencer@yahoogroups.com, "Colin f" <colin@c...> 
wrote:
> > Is it possible to give the P3 a 48 ppq sync out, for I red 
somewere
> > that the P3 runs internally on 48 ppq, or is it possible to 
program
> > the m2d2m to make a clock signal of 16 or 48 ppq and how should I 
do
> > that?
> 
> The PIC used for m2d2m doesn't have enough power to do clock 
doubling, so
> that's out.
> P3 does indeed run at 48ppqn internally. The 24 ppqn sync output is
> generated by turning the din clock pin on then off at alternate 
clock
> pulses. To have it turn on at each clock pulse, then off after a 
short
> delay, I'd need to use a timer to signal the end of the pulse. This 
could be
> done using the timer that updates the LEDs and scans the keyboards.
> I'll look into adding it as a user config option.
> 
> Cheers,
> Colin f
> 
> 
> 
Sounds good to me, I would be very happy with a 48 ppq dinsync out! 

Lately I was playing with the P3 and all of a sudden there was a tiny 
horizontal stripe in my PLED display, it was right in the middle over 
the full lenght. I thought it came there after powering off and on 
the machine accidentally. I could read the display easily, but the 
stripe was really anoying on such a nice display. After half an hour 
or so, the stripe disapeared as fast as it came there to come back 
never again?! 
And Colin, I would like a mode that can generate the brown-sound.
Cheers,
Roel




> ________________________________________________
> Message sent using UebiMiau 2.7.2