Yahoo Groups archive

Analogue-sequencer

Index last updated: 2026-04-28 23:15 UTC

Message

Re: problem trying to upload v4 on my P3

2008-05-08 by otison

well, I have never tried this dump-and-reload procedure ... I'm a 
fire-and-forget kind of musician, i.e when I produce a track on 
hardware, I usually don't backup patterns or patches... so I've never 
felt this sysex thing useful in the past so I can't really tell you.

but I will try as soon as I can and will let you know. if Sysex dump 
doesn't work what could be the case ?


--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@...> 
wrote:
>
> What is the current version of the firmware in your P3 ?
> Are you able to dump and reload pattern data using the normal sysex 
option ?
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
> 
> 
> 
> > -----Original Message-----
> > From: analogue-sequencer@yahoogroups.com 
> > [mailto:analogue-sequencer@yahoogroups.com] On Behalf Of otison
> > Sent: 04 May 2008 20:14
> > To: analogue-sequencer@yahoogroups.com
> > Subject: [analogue-sequencer] Re: problem trying to upload v4 on 
my P3
> > 
> > --- In analogue-sequencer@yahoogroups.com, "otison" 
> > <otison@> wrote:
> > >
> > > hi list,
> > > 
> > > I've had trouble today trying to (finally) upgrade to v4
> > > I'm using MidiOX to send the firmware v4 Sysex as downloaded 
from
> > > Sequentix website today:
> > > - I fire up in Firmware check mode (Func+Page) 
> > > - then I arrive to the " Boot / Flash " option page as said in 
the
> > manual
> > > - I hit "flash" , the P3 displays  "start F/W TX now" 
> > > - I launch transmission from MidiOX my led MIDI activity 
> > blinks on the
> > > interface, so midi data is definitely here.
> > > - no other MIDI cable is plugged into the P3 (apart from the 
obvious
> > > PC Out - P3 )
> > > - but hey, at the end of the transmission no nothing, nada... 
the P3
> > > stays and displays "start F/W TX now" ...
> > > 
> > > any help ? am i doing something wrong ?
> > 
> > I will also just add that when I try and send MIDI File instead
> > through Samplitude , same story the P3 is stuck in "start F/W TX 
now" 
> > 
> > 
> > 
> > 
> > ------------------------------------
> > 
> > Yahoo! Groups Links
> > 
> > 
> >
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.