Analogue-sequencer

Hi Colin,
And will the triggers be velocity sensitive? I know Simmons brains 
support this, the others probably too. That's what I miss in the Kenton 
KADI and the Engineers@work board...
I guess the velocity to Voltage range should be user settable (for all 
indi trigger outs) as I expect different brands used different 
standards. 5V seems not so high but I don't know for sure.

Hope it helps,
Eric


Op 11-5-2012 0:08, Colin f schreef:
>
>
> > 1) is there an optional drum-trigger interface yet?
>
> Not yet, but it's not too far off.
>
> > 2) can you adjust the triggers? I purchased the DrumDokta
> > and Paul reports that the ideal trigger should be 10ms triggers.
>
> On the prototype unit in my drum module, the trigger lengths are 1 or 2ms,
> hard-coded in the receiver firmware.
> Those are the two standard trigger pulse lengths used for the 808 and 909
> sounds.
> For the production board, I'll probably add support for configuration
> messages to change pulse lengths to suit different applications.
>
> Cheers,
> Colin
>
>