Analogue-sequencer

Hi Colin, Is there a drawing anywhere with the dimensions, pot/key 
spacings etc. for the Rack Panel? I've a friend offered to fabricate
one for me and whilst he could work it all out from the .fpd file on 
the site, it would be a lot easier if i could give him the drawing! 
Ta, 
Phil

> Hi Colin, Is there a drawing anywhere with the dimensions, pot/key 
> spacings etc. for the Rack Panel? I've a friend offered to fabricate
> one for me and whilst he could work it all out from the .fpd file on 
> the site, it would be a lot easier if i could give him the drawing! 

I've got an Excel spreadsheet with the spacings in it and I've been
meaning to acquire a copy of Autocad so I can do a proper drawing for
case making people. I'll try to get that done today.
The fpd is not a great reference, as the metric dimensions are far from
round numbers (19.05mm spacing between pots and switch centres) and
FrontPlatten Designer has a nasty habit of rounding them up or down so
as to make spacings irregular.

Cheers,
Colin f

> I've got an Excel spreadsheet with the spacings in it and I've been
> meaning to acquire a copy of Autocad so I can do a proper drawing 
for case making people. I'll try to get that done today.

Thanks Colin, i've a nice piece of polished stainless steel waiting 
to be fabricated. Not sure if the polished surface might be a bit OTT,
if it is... a sexy black satin finish should do the job :-)
regards, 
Phil