Analogue-sequencer

> just found this on logics homepage:
> Description:
> A device synced to Logic with MIDI Clock runs at double speed.
> Explanation:
> MIDI Clock Data is being sent twice. This happens if there is a MIDI
feedback loop in the system.

> so colin, lay back, its a problem with logic!

Cool ;-)

> is there a possibility for a firmware fix, that the p3 accepts midi in
> clock but does not
> add it to its out clock, or doesn't even send a outclock, or
> whatever.....

You can turn off the midi clock output using the 'mclk' option. Hit
FUNC+PAGE from play mode, then use F1.

Cheers,
Colin f



________________________________________________
Message sent using UebiMiau 2.7.2

Hi;

I want to work in logic as always in cycle mode to draw my 
pattern modes but  it jumps the cycle mode.

P3 is the slave,logic is the master.

Help please!

Thanks ;

Hans

--- In analogue-sequencer@yahoogroups.com, "Colin f" 
<colin@c...> wrote:
> > I want to work in logic as always in cycle mode to draw my 
> > pattern modes but  it jumps the cycle mode.
> > 
> > P3 is the slave,logic is the master.
> 
> Hans, can you elaborate - I don't follow the above at all.
> Any other Logic users know what Hans means ?
> 
> Cheers,
> Colin f

Sorry, I meant  when you choose the cycle mode so the bars are 
always cycling between the coosen bars, per example bar 1 to 4,

So.. Logic,instead of running as selected between those bars 
forever... it follows running upward.

I always work that way to sequence drums

I realized there was a way to " cheat it " wich is to choose Loop 
ON on the arrange left top corner, but another problem came to 
me..

When I do that and then I go to the P3 selected instrument, the 
one with the drums doesn´t sound anymore,it only sounds the 
instrument that you have selected at that moment.

How can I solve it?

Thanks P3 users

Hans

> I want to work in logic as always in cycle mode to draw my 
> pattern modes but  it jumps the cycle mode.
> 
> P3 is the slave,logic is the master.

Hans, can you elaborate - I don't follow the above at all.
Any other Logic users know what Hans means ?

Cheers,
Colin f

hi
 
you have to generate single instruments in the environment and then plug cables from the midi input where the p3 sends the messages direct to the instruments.
i'm not sure if i understood you'r problem right. 
i use the p3 for playing 8 software synths at once, for recording them all at one time, i generated a channel-splitter and made it visible in the environment. so its possible to record everything at one time. the 2nd way to do it is to select the red R on every instrument playing by the p3.
 
if you still have trouble write to my private email and ill send you my environment or mail me yours.
 
grz from my holidays on zanaibar island
 

turbotron69 <turbotron69@hotmail.com> wrote:

--- In analogue-sequencer@yahoogroups.com, "Colin f" 
wrote:
> > I want to work in logic as always in cycle mode to draw my 
> > pattern modes but it jumps the cycle mode.
> > 
> > P3 is the slave,logic is the master.
> 
> Hans, can you elaborate - I don't follow the above at all.
> Any other Logic users know what Hans means ?
> 
> Cheers,
> Colin f

Sorry, I meant when you choose the cycle mode so the bars are 
always cycling between the coosen bars, per example bar 1 to 4,

So.. Logic,instead of running as selected between those bars 
forever... it follows running upward.

I always work that way to sequence drums

I realized there was a way to " cheat it " wich is to choose Loop 
ON on the arrange left top corner, but another problem came to 
me..

When I do that and then I go to the P3 selected instrument, the 
one with the drums doesn�t sound anymore,it only sounds the 
instrument that you have selected at that moment.

How can I solve it?

Thanks P3 users

Hans







Yahoo! Groups Links








		
---------------------------------
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!

[Non-text portions of this message have been removed]