Analogue-sequencer

> I would like to have a uuser option to disable this rather confusing
playlist
> mode ( there is a half one mode  someone will say me) and have just a
> manual sequencer as the MAQ 16/3, I´d rather use Logic for pattern
> sequence.

If you enable the 'quick pattern select' user config option, then FUNC+track
followed by a step key press for pattern number will select the new pattern
and return to play mode.

> I have done some playlist sequences by mistake. How can I delete ALL the
> playlists without deleting my patterns?

I think you can do that - but I'll need to confirm.
If you use 'Bank init' with FUNC held while you press F1 and F2 to confirm
it will only clear the patterns on active tracks. So if you mute all tracks
and do this, I think only the playlists should be cleared. But I'll need to
check since I can't really remember.

> How was the way to actually show all the VEL,lenght,etc. of all the
sequence
> instead of  pushing Fnc + the step? I mean leaving this info all the time
for all
> the steps running.

There's no option for this, and not really a free key combination that could
be used for it.

> Is any way to deactivate FTS in pattern edit mode once selected without
> leaving pattern edit? I mean yes no option

There's no way to access the FTS settings from pattern edit, though you
could use Xd to defeat it on the pattern being edited.

> It is possible to record the actual pattern into  another  bank?

You can copy the whole pattern in edit mode, switch to another bank, then
paste the pattern. Saving a pattern to another track in the same bank might
be added, but saving directly to another bank would need a lot of work there
probably isn't space for.

Cheers,
Colin f



________________________________________________
Message sent using UebiMiau 2.7.2