Analogue-sequencer

hi Colin,
i've just been playing around with the b20 build on my working P3, and
I've noticed a thing about the "sticky keys" user-config option. A
trick I use quite a bit is switching parts while holding both the
'Func'-key and the 'Mute Hold'-key, which switches to another part
with the track-mute settings the same as they were in the previous
part while this previous part is returned to it's original track-mute
settings. Using the "Sticky Buttons" option I can't do this any more.
I also do the same trick using the 'Copy active'-key instead of the
'Mute Hold'-key. Would it be possible to make these
functions/keys/key-combinations sticky too?
Also about the "Sticky Buttons" option: would it be possible for the
sticky buttons to un-stick themselves at the end of the next Gbar? If
possible, preferably as a user-config option.

grtz Chiel

> i've just been playing around with the b20 build on my working P3, and
> I've noticed a thing about the "sticky keys" user-config option. A
> trick I use quite a bit is switching parts while holding both the
> 'Func'-key and the 'Mute Hold'-key, which switches to another part
> with the track-mute settings the same as they were in the previous
> part while this previous part is returned to it's original track-mute
> settings. Using the "Sticky Buttons" option I can't do this any more.

The stickiness only applies to the FUNC, PLAY/EDIT and REC keys at the
moment.
So you can press FUNC, which should show 'FUNC + ?', then you need to hold
'mute hold' or the 'part copy active' while selecting the new part. You
probably worked that out though.
I'll need to look at how much code it'll take to make softkeys sticky too.

> Also about the "Sticky Buttons" option: would it be possible for the
> sticky buttons to un-stick themselves at the end of the next Gbar? If
> possible, preferably as a user-config option.

You know you can press the key again to unstick ?
Clearing on GBar would be easy to do. But it might just make you do the
wrong thing if you go to make a change just as GBar is about to loop...

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com