Analogue-sequencer

hi

-----There is a user config option called 'start on cont' that  
enables this.

 > Does it always send out Midi Clock and DIN Sync?----



thx to both Colin and Jerome for this tip - that does the trick!




-----> Does it always send out Midi Clock and DIN Sync?

Early units were hard-wired for either MIDI clock or DIN sync, but  
not both.

 > I tried Sync Out to
 > the DIN Sync in on my TR-808 and it doesn't work. Also tried
 > the Sync
 > o\Out to the Midi-in on my x0xb0x, and it syncs, but there is some
 > weird stuff going on too (when I stop the P3, the x0x seems to
 > trigger randomly).

Sounds like your unit is wired for MIDI clock.------



actually, i was told that this was one of the last (maybe even THE  
last) production units --- you sold it directly to Larry in Toronto?

does that mean this should sending out both Midi & DIN ?

thx, jason








[Non-text portions of this message have been removed]

> actually, i was told that this was one of the last (maybe even THE  
> last) production units --- you sold it directly to Larry in Toronto?
> 
> does that mean this should sending out both Midi & DIN ?

It can send MIDI and DIN, and should by default.
Now that I re-read your original mail, I remembered that the 808 has a
non-standard use of pin 4 in the DIN sync input.
You'll need to use a sync lead without pin 4 connected.
The easiest way to do that is to get a lead, and carefully break off pin 4
with some pliers.
DIN plugs have strange pin numbers.
I hope Yahoo doesn't strip the spaces out of this ascii...
These are the pin numbers looking INTO a DIN PLUG.

             2
        5    O    4
        O         O

     3 O           O 1


DIN sync uses pins 1, 2 and 3.
Pin 2 is ground.

MIDI uses pins 4, 2 and 5, again pin 2 is ground.
So normally, there would be no problem with DIN sync appearing on pins 1 and
3, MIDI on 4 and 5, and ground on pin 2.
For the 808, pin 4 must be disconnected, as it is a 'reset' input.

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com