Analogue-sequencer

> I have a old P3 building kit wich I want to complete now.
> It has zeven prints, some knobs, and the P3-044 chip.
> I also own the case.
>
> My question is,
> with wich 'bill of materials'should I complete this machine,
> the 1.6 or the v1.5

Probably the 1.5.  What version number is written on your main board?  An easy way to tell which BoM to use is to see if you have two separate three pin headers for J6 and J7 (Tempo and Data) or if you have one four pin header for J6 (DTA/TMP) - if you have two, use v1.5.  If you have one, use v1.6...

Doug

hi it's a 1.4 version cause i have the 061 and it's a 1.4 pcb
version...i am building it in this moment too..if you are some
questions...ask them..best regards Boop's

 In analogue-sequencer@yahoogroups.com, Doug Wellington <doug@...> wrote:
>
> > I have a old P3 building kit wich I want to complete now.
> > It has zeven prints, some knobs, and the P3-044 chip.
> > I also own the case.
> >
> > My question is,
> > with wich 'bill of materials'should I complete this machine,
> > the 1.6 or the v1.5
> 
> Probably the 1.5.  What version number is written on your main
board?  An easy way to tell which BoM to use is to see if you have two
separate three pin headers for J6 and J7 (Tempo and Data) or if you
have one four pin header for J6 (DTA/TMP) - if you have two, use v1.5.
 If you have one, use v1.6...

> 
> Doug
>

thanks! all of You!

I found the BOM here in the files.
should I not include upgrades made later(is this possible)

and ask who?
I am a big noob with electronics, and hopefully a friend of me,
is going to help me.
But I first want to collect all the components.


--- In analogue-sequencer@yahoogroups.com, "boops.secretvibes"
<boops.secretvibes@...> wrote:

>
> hi it's a 1.4 version cause i have the 061 and it's a 1.4 pcb
> version...i am building it in this moment too..if you are some
> questions...ask them..best regards Boop's
> 
>  In analogue-sequencer@yahoogroups.com, Doug Wellington <doug@> wrote:
> >
> > > I have a old P3 building kit wich I want to complete now.
> > > It has zeven prints, some knobs, and the P3-044 chip.
> > > I also own the case.
> > >
> > > My question is,
> > > with wich 'bill of materials'should I complete this machine,
> > > the 1.6 or the v1.5
> > 
> > Probably the 1.5.  What version number is written on your main
> board?  An easy way to tell which BoM to use is to see if you have two
> separate three pin headers for J6 and J7 (Tempo and Data) or if you
> have one four pin header for J6 (DTA/TMP) - if you have two, use v1.5.
>  If you have one, use v1.6...
> > 
> > Doug
> >
>