Analogue-sequencer

Hi can anybody help, i don't know what happened, but these LEDs aren't
working anymore.
First 5 to 8 where also not working, but they work now again (after
the maschine was on 3 minutes) is there in the maschine a simple
contact which isn't good anymore, I don't think the LEDs are defect, i
think it's just a contact, but i don't know where.
Everything else, alle the functions are working correct, just those
lamps are no more blinking...

thanks for help

> Hi can anybody help, i don't know what happened, but these LEDs aren't
> working anymore.
> First 5 to 8 where also not working, but they work now again (after
> the maschine was on 3 minutes) is there in the maschine a simple
> contact which isn't good anymore, I don't think the LEDs are defect, i
> think it's just a contact, but i don't know where.
> Everything else, alle the functions are working correct, just those
> lamps are no more blinking...

The LEDs are wired in groups that have a common pin for one connection.
LEDs 13 to 16 are one group, so if they failed together, it is most likely a
poor connection on that common pin.
Try taking the front panel off and re-seating the ribbon cable connection to
the step board.

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com

--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@...>
wrote:
>
>  
> > Hi can anybody help, i don't know what happened, but these LEDs aren't
> > working anymore.
> > First 5 to 8 where also not working, but they work now again (after
> > the maschine was on 3 minutes) is there in the maschine a simple
> > contact which isn't good anymore, I don't think the LEDs are defect, i
> > think it's just a contact, but i don't know where.
> > Everything else, alle the functions are working correct, just those
> > lamps are no more blinking...
> 
> The LEDs are wired in groups that have a common pin for one connection.
> LEDs 13 to 16 are one group, so if they failed together, it is most
likely a
> poor connection on that common pin.
> Try taking the front panel off and re-seating the ribbon cable
connection to
> the step board.
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>

Thanks, works again now.

Best Wishes
Berni